Data Explorer
Every reading, on one chart
Pick readings from any sensor, tracker or machine and compare them over any period. Mark what happened, shade when a limit was crossed, and take the data with you as CSV.
Compare anything
Pick from your assets
Search or browse every sensor in your account, grouped by the asset it belongs to, and tick the readings you want.
Different units, one chart
Readings in different units get an axis each, such as vibration in mm/s against acceleration in mg.
Any period
From the last hour to months back. Drag the range bar under the chart to zoom in on a day or an hour.
Min, average and max
Each reading shows its minimum, average and maximum for the period you are looking at.
Make sense of it
Mark what happened
Click a point to add a note: a peak, a repair, a visit. The note stays on the chart.
When was it over the limit?
Shade the stretches when a reading was above or below a limit, and see how long that lasted in total.
Chart, stats, gauge or table
Switch the same readings between a chart, summary statistics, gauges and a table.
Saved views and dashboards
Save a view to come back to, or put several charts side by side on a dashboard.
Take it with you
CSV export
Download the readings you are looking at as CSV, with timestamps a spreadsheet understands.
Every reading when you need it
Long periods are thinned so the chart stays fast, and the chart tells you when. Switch to raw, or narrow the period, to see every sample.
Leave it open
Set it to refresh on its own, and the chart keeps up with new readings.
Many devices, one chart
Put the same reading from several devices together and the odd one out stands out. Here, four solar microinverters over a week, each with its own minimum, average and maximum.
What it does not do yet
- Data Explorer charts the readings you already collect. It does not add sensors or fill gaps in their history.
- Very long periods are shown at reduced resolution. The chart says so, and a shorter period, or raw mode, shows every sample.